HVAC in Edmonds

Edmonds is about 25 miles north of Seattle via I-5 — typical drive time is 35–45 minutes, closer to 30 minutes off-peak. We cover all of Snohomish County and can usually schedule a free on-site consultation within 3–5 business days of your first call. For straightforward furnace or heat pump replacements, installation typically happens 2–4 weeks after the estimate, once equipment is ordered and the mechanical permit clears Edmonds Development Services — standard processing there runs 5–10 business days for residential HVAC. Call (206) 591-1096 and you'll reach Vladislav directly, not a dispatcher or sales coordinator. He'll ask a few questions about your system, confirm a visit time, and show up with a measuring tape and a notepad — not a presentation deck.

Pricing varies significantly by scope. A ductless mini-split for an ADU or bonus room typically runs $4,500–$8,500 installed for a single zone. A gas furnace replacement — mid-efficiency, no duct modifications — starts around $4,000–$6,500. A full heat pump conversion, including removing the gas furnace, replacing the air handler, installing a cold-climate heat pump, and modifying return-air ductwork, runs $10,000–$18,000 before IRA tax credits. Those credits can reduce the net cost by $2,000–$4,000 depending on the system and your tax situation. Every quote from TopVolk is written, line-itemized, and specific — no ranges, no "starting at" placeholders. You get a real number for real equipment and real labor. Schedule a free on-site estimate by calling (206) 591-1096.

Most HVAC work in Edmonds city limits requires a mechanical permit through the City of Edmonds Development Services department. That includes furnace or heat pump replacement, ductless mini-split installation, new duct runs, and any HVAC tied to an ADU or addition. Like-for-like equipment swaps sometimes qualify for a simplified permit path, but confirm with the AHJ before assuming. Unincorporated parcels near the city edge — including parts of Esperance — fall under Snohomish County PDS jurisdiction, which is a different submittal process entirely. TopVolk is a WA Licensed Contractor and handles permit applications directly; we prepare the mechanical drawings, submit to the correct jurisdiction, schedule rough-in inspections, and walk through final inspection before closing the job.

Yes — if the air handler is compatible and the existing ductwork can move enough CFM for cooling loads. The critical check is return-air capacity. Most 1970s and 1980s forced-air systems in Edmonds were designed for heat only, with return grilles sized for lower winter airflow. Cooling demands more air movement; undersized returns cause the evaporator coil to ice up and the system to short-cycle. We measure return-air square footage and static pressure before quoting any cooling add-on. If the ducts pass, adding an AC coil and a new condenser to an existing forced-air system typically runs $5,500–$9,500 depending on tonnage and SEER rating. We install Bosch, Carrier, and Mitsubishi ducted systems for this application — equipment choice depends on the existing air handler and your efficiency priorities.

Most brands we install — Mitsubishi, Daikin, Bosch, Carrier — carry 10-year parts warranties when registered within 60 days of installation. Our labor warranty on installation work runs one year: if there's a workmanship issue — incorrect refrigerant charge, loose electrical connection, improperly pitched condensate drain line — we fix it at no charge. The PNW's marine climate is harder on outdoor equipment than inland areas; Puget Sound air accelerates coil corrosion faster than in drier climates. On west-facing or exposed condenser installations in Edmonds, we apply a corrosion-inhibiting coil coating as standard practice. Annual maintenance keeps most manufacturer warranties valid and catches small problems — low refrigerant, failing capacitor, dirty evaporator coil — before they turn into a compressor replacement.

From Edmonds we regularly work in Lynnwood, Mountlake Terrace, Shoreline, Kenmore, Bothell, Mukilteo, and Everett. King County is part of our service area too — Shoreline and Lake Forest Park are 20–25 minutes south. Snohomish County coverage includes Mill Creek, Snohomish city, and points east toward the foothills where freeze-thaw cycles in winter put extra stress on refrigerant systems. Scheduling for estimates is typically 1–2 weeks out; installation runs 2–6 weeks from estimate depending on equipment lead times and permit processing. If you're anywhere in Snohomish County and want a specific price and timeline for HVAC work, call (206) 591-1096. Vladislav picks up, asks the right questions, and gives you a real answer — 100+ projects completed since 2017 across the Seattle metro area.