Tile Installation in Port Orchard
Professional tile installation services in Port Orchard and surrounding areas • Licensed & Insured • Free estimates
Tile Installation Services in Port Orchard
Floor tile installation
Wall tile installation
Backsplash tile
Shower tile
Why Choose TopVolk Construction LLC in Port Orchard?
Licensed & Insured
Fully licensed contractor with comprehensive insurance coverage for your peace of mind.
Local Service
Serving Port Orchard and surrounding areas with fast response times and local expertise.
Direct Communication
Work directly with Vladislav - no middlemen, clear expectations, honest recommendations.
Quality Guaranteed
100+ projects completed since 2023. We pay $100 for every day past the agreed deadline.
15% OFF All Labor
Book your renovation this week and save on labor costs.
Materials are billed separately and are not included in the discount.
TopVolk installs Schluter-waterproofed tile showers and large-format porcelain floors in Port Orchard, Washington — free on-site estimates, 100+ projects completed since 2023.
Last updated August 2026
Port Orchard Tile Installation — Kitsap Rain-Ready
A heated floor that stops warming up after two winters usually points to one mistake. A Ditra-Heat mat went down over a subfloor nobody checked with a laser level. The thin-set cracked. A heating wire fractured underneath the tile. That's the kind of call TopVolk Construction fields out of Port Orchard — bathroom remodels in McCormick Woods, backsplash swaps in the older frame houses along Bay Street downtown, shower rebuilds for folks who've lived here since before the Southworth ferry dock got its last upgrade. Port Orchard sits across Sinclair Inlet from Bremerton. A lot of households here are commuters looking to upgrade a dated bathroom or kitchen without paying Seattle prices. Schluter Kerdi membrane, large-format porcelain, mid-range fixtures from Kohler or Moen — that's what shows up in most estimates written here. TopVolk Construction is owner-operated by Vladislav Volkov. Running since 2023, with 100+ projects completed across Kitsap, King, Snohomish, and Pierce counties. You talk to the person doing the tile work, not a sales rep.
Port Orchard splits pretty evenly between older housing stock and newer construction. That split changes how a tile job actually goes. Near zip 98366 — the Bay Street waterfront, the Port Orchard Marina, and the Annapolis and Retsil areas — plenty of homes date to the early-to-mid 1900s. Galvanized plumbing is common. So are post-and-pier foundations. Both make bathroom tear-outs unpredictable the moment old mud-set tile comes up. Out toward McCormick Woods and zip 98367, houses run newer. Mostly 1990s-2000s builds around the golf course community. Plywood subfloor out there is usually flat enough for large-format porcelain, with little extra prep needed. Projects inside city limits go through the City of Port Orchard permit process. That covers plumbing relocation or a dedicated circuit for a heated floor mat. Work out in unincorporated South Kitsap runs through Kitsap County DCD instead. Either way, plan review comes first. Then the shower waterproofing inspection gets scheduled. Kitsap's wet season runs October through May, close to 37 inches of rain a year. Tile set near an exterior wall or crawlspace needs a real vapor barrier behind it. Skip that step and moss and mildew show up in the grout lines within a couple of seasons.
Common Tile Installation Concerns in Port Orchard
Shower Pans Failing Behind the Tile, Not On It
Most shower leaks in Port Orchard don't start at the grout. They start at the pan liner or the curb, where an old mortar-bed shower was never properly waterproofed before the tile went on. We tear out to the studs and rebuild with Schluter Kerdi membrane over the pan, curb, and niche. Inside corners are hardest to seal, so we sometimes add RedGard as a liquid-applied backup there. A full shower re-tile with new waterproofing runs $4,500 to $9,000. Price depends on size and shower type, curbless or standard curb. The job takes 1 to 2 weeks from demo to grout cure. Skip this step, and that's why so many McCormick Woods and Retsil bathrooms rot out the backer board after 10-12 years.
Large-Format Porcelain Telegraphing Every Dip in the Subfloor
A 24x48 or 32x32 porcelain tile doesn't flex like old 12x12 ceramic did. Any dip or hump in the subfloor shows up as lippage at every edge. We run a laser level across the room before setting anything. If the floor's out by more than 1/8 inch over 10 feet, we pour self-leveling underlayment first — often over DriCore subfloor panels in older Bay Street homes where the original plank subfloor has settled. Skipping this step is the single biggest reason large-format tile jobs get called back. Leveling adds $3 to $6 per square foot but saves the whole floor from cracking within a year.
Backsplash Tear-Outs That Turn Into Electrical Rewiring Jobs
Half the backsplash calls we get in Port Orchard start as a simple tile swap. Then they turn into an electrician's job. Why? The outlets behind an old backsplash often aren't GFCI-protected, or they sit in the wrong spot for a new range hood. Most kitchens here still run a Whirlpool or GE range from the original build. Swap in a new Bosch or KitchenAid unit, and the backsplash tile layout often has to shift too. Moving an outlet during a kitchen remodel needs its own electrical permit through the City of Port Orchard permit center, on top of the standard building permit for tile and countertop work. We line up that MEP work early, so the tile crew isn't stuck waiting on an inspection mid-job. Budget an extra $400-$900 if outlets need moving first.
Cold Bathroom Floors and Ditra-Heat Systems Installed Wrong
A heated tile floor is one of the most requested upgrades in South Kitsap remodels. It's also one of the most commonly botched. Schluter Ditra-Heat or a Warmup cable system needs a dedicated 20-amp circuit and a GFCI-protected thermostat. The sensor wire has to be set correctly, too, or it gets sliced during thin-set troweling. We see that mistake in about one out of five prior installs we inspect. Done right, adding a heated floor to a bathroom tile job runs $1,200 to $2,500 on top of the base tile cost. Worth it in a Port Orchard winter, when the slab floor sits at 55 degrees before sunrise.
Natural Stone and Shower Niches That Stain or Leak Within a Year
Marble and travertine look good in a McCormick Woods primary bath, but both are porous. Kitsap's humidity means they need a penetrating sealer reapplied every 12-18 months, or they'll stain from soap scum and grout haze. Shower niches are the other weak point. If the niche isn't framed with a slight forward pitch and wrapped in Kerdi before tile goes on, water pools at the back seam and finds its way into the wall cavity. We also detail tile-to-hardwood transitions with a proper expansion gap and transition strip, so seasonal wood movement doesn't crack the grout line. Sealing service runs $150-$350 per bathroom, depending on square footage.
Frequently Asked Questions
How fast can you get to Port Orchard for Tile Installation?▼
We run projects across Kitsap County regularly, coming over via the Southworth or Bremerton side depending on the job site. Port Orchard isn't an add-on trip — it's part of the regular route, from the Bay Street waterfront out to McCormick Woods. Most jobs start with a free on-site estimate within a few days of your call. Once a contract's signed, small bathroom tile jobs typically run 3-5 weeks including waterproofing cure time, while a full kitchen backsplash and remodel runs 6-10 weeks. Parking is rarely an issue outside downtown Bay Street, where we plan around narrower street access. Call (206) 591-1096 to get on the schedule.
What does tile installation cost in Port Orchard?▼
A standard bathroom shower re-tile with Schluter Kerdi waterproofing runs $4,500-$9,000. A kitchen backsplash with electrical coordination runs $1,800-$4,500. Large-format porcelain flooring runs $12-$22 per square foot installed, more if the subfloor needs leveling first. What moves the number most is substrate condition — old mortar-bed showers and uneven plank subfloors near Bay Street cost more to prep than newer McCormick Woods construction. We write line-item quotes, not vague ranges, after the free on-site walkthrough. Call (206) 591-1096 and Vladislav will give you an exact number, not a guess.
Do I need a permit for a tile remodel in Port Orchard?▼
Most shower rebuilds and kitchen backsplashes touch plumbing, electrical, or structural framing. If yours does, it needs a permit. In-city addresses go through the City of Port Orchard permit center. Unincorporated South Kitsap addresses go through Kitsap County DCD instead. We pull the permit for you. We prep the plumbing and electrical paperwork, too, and schedule the waterproofing and rough-in inspections as part of the contract. TopVolk Construction is a WA Licensed Contractor. You won't be the one chasing an inspector's calendar.
Can you install tile over a heated floor system in an existing bathroom?▼
Yes. Schluter Ditra-Heat and Warmup cable systems both work over most existing plywood or DriCore subfloor. The floor needs to be level first. The old flooring has to come out down to a clean substrate, too. We run a dedicated 20-amp circuit for the thermostat. Then we test the heating wire's resistance before and after tile-setting, to confirm nothing got nicked. We favor large-format porcelain over small mosaic here, since it spreads heat more evenly across the floor. Plan on about a week added to a standard bathroom tile timeline.
What's the warranty on tile installation work, and how long does it actually last?▼
Workmanship is covered for one year. Tile itself, porcelain especially, should outlast the house if the waterproofing behind it was done right. In Port Orchard's climate, a Kerdi-waterproofed shower or a vapor-barrier-backed floor typically runs 20+ years before it needs regrouting or resealing. Natural stone is different. It needs resealing every 12-18 months regardless. Not covered: damage from a plumbing leak that isn't tied to our work, or grout failure because a homeowner skipped sealing their stone. Missed deadlines carry a penalty written into every contract.
Do you cover areas near Port Orchard, and how far out do you schedule?▼
We work all of Kitsap County plus King, Snohomish, and Pierce — so Bremerton, Gig Harbor, and Silverdale are regular stops alongside Port Orchard. Scheduling typically runs 2-4 weeks out from signed contract to start date, depending on material lead time for tile orders. Vladislav handles the estimate and the install directly, so there's no middleman slowing down the timeline. Call (206) 591-1096 or schedule a free consultation to get a firm date.
Ready to start your Tile Installation in Port Orchard?
Free on-site consultation with Vladislav. Line-item pricing — no vague ranges.
We Also Serve Nearby Cities
What Our Port Orchard Customers Say
Vlad and his team did an amazing job! They built our deck in just 3 days—no issues at all. Communication was easy, and Vlad helped us choose right deck planks. Installation was quick and flawless. Highly recommend!
Really happy with the service! Vlad was easy to communicate with and helped us to find the best garage door opener. The installation was quick and he did a perfect job. A few months later, I had a question and he came by the same day - even on a weekend. That kind of follow-up is rare these days!
Vlad replaced a bathroom exhaust fan and gave me a reasonable quote up front with no hidden fees. While replacing the fan, he discovered a plumbing vent issue causing mold. He fixed the pipe and treated the mold at a reasonable cost. I really appreciate his honesty!
Outstanding work done by Vlad and team for our home cabinet/living room interior work. Very professional and reasonable charges. Love the service.
We hired TopVolk for a full kitchen remodel and couldn't be happier. From the initial consultation to final walkthrough, Vlad was professional and attentive to every detail. The result exceeded our expectations!
Excellent bathroom renovation! Vlad completed the project on time and on budget. His attention to detail and craftsmanship is outstanding. We'll definitely hire him again for future projects.