Kitchen Remodel in Des Moines
Professional kitchen remodel services in Des Moines and surrounding areas • Licensed & Insured • Free estimates
Des Moines Kitchen Remodel — Opening Up Ranch Homes
Marine View Drive and the hillside streets east of the Des Moines Marina hold a lot of 1960s and 70s ramblers — the kind with 8-foot ceilings, closed galley kitchens, and Whirlpool appliances that have been running since the Carter administration. Pulling the wall between kitchen and dining room almost always means load-bearing work. That's an LVL beam, a permit through King County DPER or the City of Des Moines depending on your parcel, and a rough-in inspection before any drywall goes back up. Vladislav handles every consultation personally — call (206) 591-1096 to schedule a free on-site walkthrough before demo day.
The 98198 zip runs from the waterfront bluff neighborhoods near Saltwater State Park up through the residential blocks between 216th and 240th — most of it built between 1960 and 1985. Original kitchens in these homes sit on 100-amp electrical service, which is marginal once you're running a Bosch dishwasher, induction range, and microwave at the same time. Panel upgrade to 200A is common before cabinet layout starts. PNW humidity also hits these older crawlspace homes hard — vapor barrier condition matters before you set new flooring. TopVolk is a WA Licensed Contractor with 100+ projects completed since 2017, and every remodel contract includes a deadline penalty clause so the schedule stays locked.
Common Kitchen Remodel Concerns in Des Moines
Load-Bearing Walls Blocking Open-Concept Layouts
Ranch homes and split-levels throughout 98198 were built with interior load-bearing walls running perpendicular to the ridge line. Opening the kitchen into the dining room requires a structural assessment, an LVL beam sized to the actual span, and PSL post support at both ends. King County DPER plan review for structural kitchen work runs 4-8 weeks. Beam sizing isn't estimated — an engineer stamps the drawings before demo gets pulled. Call (206) 591-1096 for a free consultation; Vladislav walks the site and coordinates the engineer directly so nothing stalls at permit.
100-Amp Panels Too Small for Modern Kitchen Appliances
A KitchenAid induction range pulls 40-50 amps at load. Add a GE Profile refrigerator, dishwasher, and over-range microwave, and the 100A panels standard in homes built through the mid-1970s are already at their limit. Upgrading to 200A service needs a permit, a licensed electrician, and a PSE meter pull coordination. TopVolk manages the GC scope — electrical goes to a licensed sub. WA Licensed Contractor, 100+ projects completed since 2017. Deadline penalty clause is written into the contract, so the panel upgrade doesn't stall your cabinet install date.
Cabinet Layout Problems in Narrow Galley Configurations
Original galley kitchens in Des Moines ramblers run 7-8 feet wide — no island, limited counter run, and upper cabinets set too low for modern hood CFM clearance requirements. Semi-custom cabinet lines like KraftMaid offer more depth options and better box construction than IKEA SEKTION for this climate. Quartz countertops hold up better than granite here because they don't need annual sealing against the moisture these older crawlspaces push up. Schedule a free consultation at (206) 591-1096 — Vladislav measures the existing layout and specs the cabinet order before anything gets demoed.
Frequently Asked Questions
How fast can you get to Des Moines for a kitchen remodel consultation?▼
Des Moines is 20-25 minutes south on I-5 from base — straightforward run past SeaTac. Call (206) 591-1096 and Vladislav comes out personally for a free on-site walkthrough. No sales staff, no commissioned closer. The person who runs the project from day one is the same person at your kitchen table going over the scope and timeline.
Do you work with Bosch, KitchenAid, and Samsung appliances during remodels?▼
Yes. Rough-in dimensions for Bosch dishwashers, KitchenAid ranges, Samsung French-door refrigerators, and LG built-ins get confirmed before cabinet orders are placed — not after. Appliance fitment surprises at install are expensive and avoidable. Spec sheets get pulled early and the layout is built around actual clearances. TopVolk is a WA Licensed Contractor with 100+ projects since 2017 — this isn't the first time a 36-inch fridge needed an extra half-inch of filler panel worked into the run.
How long does a full kitchen remodel take in Des Moines, and what's the permit process?▼
A full kitchen — demo, structural work if applicable, cabinets, countertops, appliances, flooring, electrical and plumbing rough-ins — runs 6-10 weeks once permits are in hand. Budget 4-8 weeks for King County DPER plan review if your project includes a load-bearing wall removal. Deadline is written into the contract with a penalty clause — TopVolk pays if the crew misses it. Drawings get submitted directly; you don't chase the permit office. Call (206) 591-1096 to schedule a free consultation with Vladislav and lock in the timeline.
Ready to start your Kitchen Remodel in Des Moines?
Free on-site consultation with Vladislav. Line-item pricing — no vague ranges.
Kitchen Remodel Services in Des Moines
Cabinet installation
Countertop replacement
Appliance installation
Backsplash installation
Why Choose TopVolk Construction LLC in Des Moines?
Licensed & Insured
Fully licensed contractor with comprehensive insurance coverage for your peace of mind.
Local Service
Serving Des Moines and surrounding areas with fast response times and local expertise.
Direct Communication
Work directly with Vladislav - no middlemen, clear expectations, honest recommendations.
Quality Guaranteed
100+ projects completed since 2017. Full responsibility with penalties for missed deadlines.
15% OFF All Labor
Book your renovation this week and save on labor costs.
Materials priced separately at cost.
We Also Serve Nearby Cities
What Our Des Moines Customers Say
Vlad and his team did an amazing job! They built our deck in just 3 days—no issues at all. Communication was easy, and Vlad helped us choose right deck planks. Installation was quick and flawless. Highly recommend!
Really happy with the service! Vlad was easy to communicate with and helped us to find the best garage door opener. The installation was quick and he did a perfect job. A few months later, I had a question and he came by the same day - even on a weekend. That kind of follow-up is rare these days!
Vlad replaced a bathroom exhaust fan and gave me a reasonable quote up front with no hidden fees. While replacing the fan, he discovered a plumbing vent issue causing mold. He fixed the pipe and treated the mold at a reasonable cost. I really appreciate his honesty!
Outstanding work done by Vlad and team for our home cabinet/living room interior work. Very professional and reasonable charges. Love the service.
We hired TopVolk for a full kitchen remodel and couldn't be happier. From the initial consultation to final walkthrough, Vlad was professional and attentive to every detail. The result exceeded our expectations!
Excellent bathroom renovation! Vlad completed the project on time and on budget. His attention to detail and craftsmanship is outstanding. We'll definitely hire him again for future projects.