Fence Installation in Edgewood
Professional fence installation services in Edgewood and surrounding areas • Licensed & Insured • Free estimates
Fence Installation Services in Edgewood
Wood fence installation
Vinyl fence installation
Chain link fence
Fence repair
Why Choose TopVolk Construction LLC in Edgewood?
Licensed & Insured
Fully licensed contractor with comprehensive insurance coverage for your peace of mind.
Local Service
Serving Edgewood and surrounding areas with fast response times and local expertise.
Direct Communication
Work directly with Vladislav - no middlemen, clear expectations, honest recommendations.
Quality Guaranteed
100+ projects completed since 2023. We pay $100 for every day past the agreed deadline.
15% OFF All Labor
Book your renovation this week and save on labor costs.
Materials are billed separately and are not included in the discount.
TopVolk Construction builds cedar, vinyl, and slat fences in Edgewood, WA — 2-4 day installs, on-site quotes from owner Vladislav Volkov.
Last updated August 2026
Edgewood Fence Installation — Cedar, Vinyl & Slat Fencing
Fence posts sunk less than 24 inches into Edgewood's clay-heavy soil are the number-one reason fences here lean by year three — the fix is a proper post setting depth with concrete footings poured below the frost line, not a quick patch job. That's the answer to what most homeowners near Jovita Park and the Edgewood Community Park corridor are actually asking when they call: how deep, how long, how much. A property off Meridian Avenue recently needed 42 cedar pickets replaced after the original contractor set posts in gravel backfill with no concrete at all — two winters of saturated ground and wind off the SR 167 corridor did the rest. TopVolk Construction, owner-operated by Vladislav Volkov since 2023, has built and rebuilt fence lines across Pierce County using Trex Seclusions composite panels, cedar board-on-board, and powder-coated aluminum depending on budget and how much upkeep a homeowner actually wants to do. Most residential jobs in Edgewood run 2 to 4 days from post hole to gate hardware, with an exact linear-foot price quoted on-site, not guessed over the phone.
Edgewood sits between Puyallup and Auburn along the SR 167 and SR 512 corridors, and the housing stock in the 98371 and 98372 zip codes runs from 1970s-80s split-levels near Jovita to newer custom builds on larger lots toward the Meridian side of town — bigger parcels mean more linear footage per job and often mixed terrain across a single property line. A lot of these older homes still carry original wood fencing from prior owners, cedar that's gone gray and split at the rail joints after 20-plus years of Pierce County rain, and homeowners are increasingly swapping to Trex or Illusions vinyl panels for the lower upkeep. Fence permits in Edgewood go through the City of Edgewood Community Development Department rather than Pierce County PALS, since Edgewood is incorporated — PALS still applies just south toward unincorporated Frederickson. Standard fence height in residential zones tops out at 6 feet for side and rear yards, 4 feet in front setbacks, and anything taller — including retaining wall fence combinations — needs a permit review before framing starts.
Common Fence Installation Concerns in Edgewood
Posts heaving or leaning after one wet season
Clay soil around Edgewood holds water through the October-to-May rain stretch, and posts set less than 24 inches deep — or set in tamped dirt instead of concrete — start leaning by the second winter. The fix is re-drilling with a post hole auger to 30-36 inches, below the frost line, and setting pressure-treated (PT) 4x4 posts in a concrete footing with a Simpson Strong-Tie post base for anchoring above grade. On a typical 150-foot residential line this repair runs $60-$90 per post replaced, versus $28-$45 per linear foot for a full rebuild. Cedar posts especially need this depth since the wood itself absorbs moisture faster than PT lumber.
Cedar picket rot at the grade board
The bottom rail — the kickboard or grade board that sits closest to the soil — is almost always the first part to rot on a cedar fence, since it holds splash-back moisture off the lawn and doesn't dry out between Edgewood's rain events. Homeowners near the older Jovita-area lots see this most, usually 12-15 years after original install. TopVolk swaps the grade board for a PT or composite grade board, sometimes paired with Trex Seclusions panels above it, so the visible fence keeps the cedar look but the ground-contact piece won't rot again. Grade board replacement alone runs $15-$25 per linear foot, far cheaper than a full fence replacement.
Property line disputes stall the permit before it starts
Edgewood lots platted in the 1970s and 80s don't always match modern GPS survey data, and a fence built two feet off the actual property line becomes a neighbor problem, not a permit problem. Before pulling a City of Edgewood fence permit, TopVolk verifies survey pins or recommends a licensed surveyor if pins are missing or disputed — cheaper to spend $400-$600 on a survey now than tear out a fence later. Retaining wall fences or combination structures over 4 feet require plan review through the city, typically 2-3 weeks. TopVolk Construction is a WA Licensed Contractor and handles the permit paperwork directly, no separate permit-runner fee.
Sticker shock from vague phone quotes
A lot of Edgewood homeowners get a range like '$40-$70 a foot' over the phone with no breakdown, then the final invoice doesn't match. Actual cost drivers are material (cedar picket runs cheaper upfront than Trex composite, but composite skips the recoat cycle), gate count and hardware — D&D Technologies self-closing hinges and a Mighty Mule electric opener add real cost — and terrain, since sloped yards near the Meridian side need stepped or racked panels. Vladislav walks the property line in person and quotes exact linear-foot pricing before any deposit, typically $32-$58/ft installed depending on material, with the number written into the contract along with a deadline penalty clause.
Vinyl panels cracking or chalking after a few PNW summers
Lower-grade vinyl fencing can go brittle and crack at the rail-to-post connection after repeated freeze-thaw cycling near the Enumclaw foothills influence that reaches Edgewood's colder mornings, and cheaper panels chalk and fade under UV even with our mild summers. CertainTeed and Illusions Vinyl Fence panels hold up better long-term because the PVC blend resists UV chalking and the rail inserts are reinforced aluminum, not hollow plastic. Expected lifespan on a properly installed vinyl fence is 20-25 years versus 12-18 for stained cedar. When a panel does crack, it's a section swap, not a full rebuild — usually $150-$300 per panel including labor.
Frequently Asked Questions
How fast can you get to Edgewood for Fence Installation?▼
Edgewood sits right off SR 167 and SR 512, about a 20-25 minute drive from TopVolk's typical Pierce County jobs, so scheduling a walkthrough usually happens within the week. Most residential fence lines — 150 to 300 linear feet — install in 2 to 4 days once materials are on-site, weather permitting since wet clay soil slows post-hole digging. Access matters too: gate-width delivery paths get materials staged faster than tight side-yard lots. Call (206) 591-1096 to get on the schedule or book a free on-site consultation with Vladislav directly.
What does fence installation in Edgewood cost per foot?▼
Cedar picket runs roughly $28-$45 per linear foot installed, vinyl panel like Illusions or CertainTeed runs $38-$58/ft, and Trex composite fencing runs toward the higher end around $50-$70/ft depending on panel style and gate count. Sloped lots, extra gates with self-closing hardware, and retaining wall combinations push cost up. Every quote is a walked, measured, line-item number from Vladislav on-site — not a phone estimate — and it's free. Call (206) 591-1096 for a walkthrough.
Do I need a permit to build a fence in Edgewood?▼
Fences under 6 feet in side and rear yards, and under 4 feet in front setbacks, typically don't require a separate permit through the City of Edgewood Community Development Department, but retaining wall fences or anything combined with a wall over 4 feet does need plan review, usually 2-3 weeks. TopVolk Construction, a WA Licensed Contractor, verifies zoning setbacks and property lines before digging and handles permit submission when required. Unincorporated parcels near Frederickson fall under Pierce County PALS instead — the process differs slightly, and TopVolk knows both.
Cedar or vinyl — which holds up better in Edgewood?▼
Cedar picket looks better initially and costs less upfront, but it needs restaining every 3-4 years and the grade board tends to rot first in wet clay soil. Vinyl panels from CertainTeed or Illusions, and composite options like Trex Seclusions, cost more per foot but need essentially zero maintenance and resist the freeze-thaw cracking that hits lower-grade vinyl near the foothills. For gates, D&D Technologies self-closing hinges and a Mighty Mule opener add convenience on either material. Vladislav can walk through both options and real cost-over-10-years numbers on-site.
What's the warranty on a new fence from TopVolk?▼
Workmanship is covered for 2 years, including post movement, gate alignment, and hardware failure — not typical wear like cedar graying, which is expected weathering, not a defect. Material warranties pass through from the manufacturer: Trex and CertainTeed vinyl typically carry 20-25 year limited warranties against cracking and fading. Expected lifespan in Edgewood's climate runs 12-18 years for stained cedar and 20-25 years for vinyl or composite with proper post depth. Deadline penalties are written into every contract, not just promised verbally.
Do you cover areas near Edgewood too?▼
TopVolk Construction works Edgewood alongside Puyallup, Sumner, Auburn, and the rest of King, Snohomish, Pierce, and Kitsap counties — 100+ projects completed since 2023, all owner-led with direct communication with Vladislav, no sales staff involved. Scheduling windows run 1-2 weeks out for fence work depending on season, faster in summer's dry stretch. Call (206) 591-1096 or ask for a free on-site consultation to get an exact quote for your property line.
Ready to start your Fence Installation in Edgewood?
Free on-site consultation with Vladislav. Line-item pricing — no vague ranges.
What Our Edgewood Customers Say
Vlad and his team did an amazing job! They built our deck in just 3 days—no issues at all. Communication was easy, and Vlad helped us choose right deck planks. Installation was quick and flawless. Highly recommend!
Really happy with the service! Vlad was easy to communicate with and helped us to find the best garage door opener. The installation was quick and he did a perfect job. A few months later, I had a question and he came by the same day - even on a weekend. That kind of follow-up is rare these days!
Vlad replaced a bathroom exhaust fan and gave me a reasonable quote up front with no hidden fees. While replacing the fan, he discovered a plumbing vent issue causing mold. He fixed the pipe and treated the mold at a reasonable cost. I really appreciate his honesty!
Outstanding work done by Vlad and team for our home cabinet/living room interior work. Very professional and reasonable charges. Love the service.
We hired TopVolk for a full kitchen remodel and couldn't be happier. From the initial consultation to final walkthrough, Vlad was professional and attentive to every detail. The result exceeded our expectations!
Excellent bathroom renovation! Vlad completed the project on time and on budget. His attention to detail and craftsmanship is outstanding. We'll definitely hire him again for future projects.