Door Installation in Poulsbo

TopVolk crosses into Kitsap via the Bainbridge ferry and Agate Pass Bridge, or down through Tacoma Narrows on Highway 16, depending on which route's running better that day — either way, Poulsbo jobs get scheduled within 1-2 weeks of the initial call. Parking on Front Street gets tight during summer tourist season, so for downtown jobs we usually stage materials at the house rather than the curb. Single-door swaps are often finished same-day once on site. Call (206) 591-1096 to get on the schedule.

A standard entry door replacement runs $1,800-$3,200 installed, including the slab, hardware, and flashing work; multi-slide patio door conversions run $9,000-$18,000 depending on panel count and whether structural framing changes are needed. Garage door replacement lands between $1,400-$4,800 depending on insulation and panel style. Every quote from TopVolk is a line-item breakdown, not a ballpark range emailed after a phone call. Schedule a free on-site consultation and Vladislav will walk the opening and give you an exact number before any work starts. Call (206) 591-1096.

Straight slab swaps in the same rough opening typically don't need a permit, inside city limits or in unincorporated Kitsap. Anything that changes the structural opening — widening a wall for a multi-slide door, adding a header, or altering an egress bedroom door — needs one. Inside Poulsbo city limits that goes through the City of Poulsbo permit office; homes out past Vinland or Lemolo in unincorporated North Kitsap file through Kitsap County DCD instead, and review typically takes 2-4 weeks. TopVolk is a WA Licensed Contractor and handles the permit application and inspection scheduling as part of the job.

Yes — a lot of the early-1900s buildings downtown still have mortise locksets and original hinges that clients want to keep even when the door slab itself needs replacing. We can retrofit a new fiberglass or solid wood slab to accept the existing mortise lock and hinge placement, or source period-correct reproduction hardware if the originals are too corroded to reuse. For a full slab-and-frame replacement where nothing is salvageable, JELD-WEN and Therma-Tru both make wood-grain fiberglass options that read close to original solid wood from the sidewalk. Bring a photo of the existing hardware to the consultation.

Fiberglass and steel entry doors we install carry a manufacturer warranty on the slab and finish, typically 10-20 years depending on the line, plus our own labor warranty on the installation itself. In this climate, expect to re-caulk and check weatherstripping every couple years regardless of door material — that's normal maintenance, not a defect. Solid wood doors need a fresh finish coat every 3-4 years on any elevation that takes direct rain. Garage door panels carry their own manufacturer warranty separate from the opener and hardware.

Poulsbo jobs get grouped with the rest of our North Kitsap route, so we're regularly out in Kingston, Suquamish, Silverdale, and Bremerton the same week — worth asking if you want to coordinate scheduling with a neighbor. Typical booking window runs one to two weeks out from the first call, faster if it's a single-door swap with material already in stock. TopVolk covers King, Snohomish, Pierce, and Kitsap counties out of Seattle. Call (206) 591-1096 or ask for a free consultation and Vladislav will give you a real date.